- Why is the Safe-T-Beam® light blinking?
Safe-T-Beam is a government-required safety feature that must be installed in order for your Genie garage door opener to work. A flashing Safe-T-Beam LED indicator means a malfunction has occurred. First, be sure that the lenses are clean, and check for any possible obstructions or loose wires. Also, make sure that lenses are mounted five to six inches from the floor on either side of the garage-door opening and that lenses are aligned facing one another. If the LED indicator continues to flash, see your owner’s manual for a list of possible causes and additional troubleshooting.
- Why does my Genie garage door opener reverse/open when I try closing it?
The likely culprit is an obstruction in the path of the garage door. Check for and clear any obstructions in its way. If the problem persists, check to see if the red Safe-T-Beam LED indicator is blinking. If it is, be sure that the lenses are mounted five to six inches from the floor on either side of the garage-door opening. If the Safe-T-Beam® lenses appear to be installed properly and aligned facing one another, refer to the troubleshooting section of your owner’s manual for additional causes and solutions.
- Why does the Genie opener run without moving the door?
Your garage door may be disconnected from the opener. Check that the emergency-release cord has not been pulled. If this is the reason, you will need to reengage the carriage. The method to reengage the carriage depends on the model of garage door opener you own. See your owner’s manual for more details.
- Why won’t my Genie remote work?
For expert advice, contact your Action Door Services in Las Vegas at 702-369-6044 or firstname.lastname@example.org